Type: stainless steel 45 degree elbow long radius

Size range:
Outer diameter seamless (SMLS): 1/2"-20", DN15-DN500, butt welding elbow (seam): 1/2"-48", DN15-DN1200
Wall thickness: 1mm--60mm .SCH5S -SCHXXS

Material range: ASTM A403 WP304, 304L,

Production standards:
GB/T12459, GB/T13401, SH3408, SH3409,

Surface treatment: sand rolling, sand blasting, pickling,
Packing: wooden box, according to customer requirements

Applications: petroleum, chemical, electric, natural gas, metallurgy, shipbuilding,

Minimum order: 1 piece

Delivery time: 1-45 days after receiving the deposit, depending on the quantity required.

Third party inspection: BV, SGS, etc. accepted

Testing: direct reading spectrometer, hydraulic testing machine, X-ray detector, ultrasonic flaw detector, magnetic particle detector, etc.

Elbow In the piping system, the stainless steel elbow is a pipe that changes the direction of the pipe. According to the angle, there are three most commonly used 45° and 90°180°, and other abnormal angle elbows such as 60° are also included according to engineering needs. Elbows are made of cast iron, stainless steel, alloy steel, malleable iron, carbon steel, non-ferrous metals and plastics. The way to connect to the pipe is: direct welding (the most common way) flange connection, hot melt connection, fused connection, threaded connection and socket connection. According to the production process, it can be divided into: welding elbow, punching elbow, push elbow, casting elbow, etc. Other names: 90 degree elbow, right angle bend, love and bend.

Divided by its radius of curvature: can be divided into long radius elbows and short radius elbows. The long radius elbow refers to the outer diameter of the tube whose radius of curvature is equal to 1.5 times, that is, R = 1.5D; the short radius elbow refers to its radius of curvature equal to the outer diameter of the tube, that is, R = 1.0D. (D is the elbow diameter and R is the radius of curvature).